CiudadWireless
Inicio Wireless Networking Voz sobre IP ADSL Multimedia Videovigilancia Movilidad Domótica Informática Software Smartphones Formación
Inicio » Catálogo » Voz sobre IP » Failover » BNFOS110 | | Mi Cuenta | Ver Cesta | Realizar Pedido
Búsqueda Rápida
 
Búsqueda Avanzada
Categorias
 Wireless
 Networking
 Voz sobre IP
   Accesorios
   Adaptadores ATA
   Auriculares
   Centralitas PBX
   Conferencia
   Estaciones base
   Failover
   Gateways
   Licencias VoIP
   Lineas IP
   Porteros/Videoporteros IP
   RDSI
   Repetidores DECT
   Routers + VoIP
   Sistemas Multicelda
   Tarjetas VoIP
   Telefonos Analogicos
   Telefonos DECT
   Telefonos IP
   Telefonos USB / Skype
   Telefonos WiFi
 ADSL
 Multimedia
 Videovigilancia
 Movilidad
 Domótica
 Informática
 Software
 Smartphones
 Formación
Fabricantes
Compras más
0 productos
Notificaciones más
NotificacionesNotifiqueme de cambios a Beronet BNFOS110 Failover Switch with 1 1 0V
Comentarios más
Escribir ComentarioEscriba un comentario para este producto
Webs amigas
Seguridad Wireless
elhacker.net
Información
Blog Gatuno
Envios/Devoluciones
Confidencialidad
Condiciones de uso
Contactenos
Datos Bancarios
Ofertas de Empleo
Alta de distribuidores
Política de Cookies
Como Llegar
Idiomas
Español
 Beronet BNFOS110 Failover Switch with 1 1 0V
[BNFOS110]

Precio: 685.51EUR
IVA:143.96
Precio total: 829.46

Stock:0

Beronet BNFOS110 Failover Switch with 1 1 0V

Disasters in a communication network are often very difficult to predict and there is usually a very small advance notice when a communication line goes down. bero*fos provides an effective way for dealing with such unexpected events by re-routing the lines to a back-up line when undesirable changes are detected. Therefore beroNet provides bero*fos, a solution device for Asterix Clustering and failover scenarios that requires a physical reconnection of analogue, BRI or PRI lines. Two failover scenarios, Failover and Bypass mode, are supported as described in figure 1 and figure 2:

Failover Scenario
The failover scenario grants the smooth and reliable operation of two PBXs side by side, where the second one will be switched to active only after the failure of the first one in order to reduce downtime to a minimum (see figure). This scenario is not only interesting in failure situations, it could also be used in cases of maintenance, repair or upgrade of your telecommunications equipment.


Bypass Scenario
The bypass scenario is interesting for customers who want to keep their old telephone system and add new functionlalities by adding a new PBX in front of the old one (eg by an Asterisk system). With the bypass scenario you have the opportunity to add a new PBX between the PSTN Lines and the outgoing Lines of the old PBX system. In the case of a failover, the PSTN Lines will transparently reconnected to the existing old PBX (see figure).



Bero*fos provides two additional switchable powerports on the rear, which can be used to reboot the connected devices by remote control. All features and settings can easily be managed via a web browser. The Bero*fos can be accessed via Syslog and an API for custom applications

Features
• 4 x 4 RJ45 ports to switch up to 4 BRI (8BRI with BN8S0 card) or 4 PRI interfaces
• All 8 pins of each RJ45 are switched
• Failover and bypass mode scenarios
• Fully controleable over TCP/IP or web interface with 10/100 Base Ethernet
• Onboard watchdog for automatic failover switching
• Onboard e-mail notification in failover cases
• Syslog output to control the device for individual customer applications
• Two switchable powerports on the rear for reboot purposes
• Version: 110V 
Beronet BNFOS110 Failover Switch with 1 1 0V

Haga Click para agrandar
Para obtener más información, visite la página del producto.
Este producto esta en nuestro catálogo desde jueves 30 abril, 2015.
Comentarios
Stock:0
Fabricante
Beronet
Página de Beronet
Otros productos
Hazte distribuidor de CiudadWireless Confia tu proyecto con nosotros
Ofertas más
D-Link DGS-1510-20 20-Port 10/100/1000Mbps Gigabit Stackable SmartPro Switch including 2 SFP ports and 2 x 10G SFP+ ports - 16 x

D-Link DGS-1510-20 20-Port 10/100/1000Mbps Gigabit Stackable SmartPro Switch including 2 SFP ports and 2 x 10G SFP+ ports - 16 x
241.47EUR
178.32EUR
D-Link DGS-3420-28SC 24-Ports SFP Layer 2+ Stackable Gigabit Switch including 4-port Combo 1000BaseT/SFP plus 4 10GE SFP+ - Incl

D-Link DGS-3420-28SC 24-Ports SFP Layer 2+ Stackable Gigabit Switch including 4-port Combo 1000BaseT/SFP plus 4 10GE SFP+ - Incl
1,366.44EUR
1,444.94EUR
D-link DIR-615 Wireless N 802.11n Home Gateway with 4 Port 10/100Mbps Switch

D-link DIR-615 Wireless N 802.11n Home Gateway with 4 Port 10/100Mbps Switch
27.44EUR
22.20EUR
Tenda P1000X2 Pack de 2 adaptadores Powerline Gigabit, Plug & Play de bajo consumo

Tenda P1000X2 Pack de 2 adaptadores Powerline Gigabit, Plug & Play de bajo consumo
39.15EUR
32.98EUR
D-link DES-3028 24-Port Stackable 10/100Mbps Managed Switch, 4 1000BaseT, 2 100Base-FX/SFP combo Option
- 24 100BaseTX Auto-Nego

D-link DES-3028 24-Port Stackable 10/100Mbps Managed Switch, 4 1000BaseT, 2 100Base-FX/SFP combo Option - 24 100BaseTX Auto-Nego
201.16EUR
179.98EUR

precios validos salvo error tipográfico, IVA NO INCLUIDO
Tlf: 910609721| Fax: 916932130

CIUDADWIRELESS INFORMÁTICA Y TELECOMUNICACIONES, S.L.
El horario de atención al público y recogida de pedidos es de Lunes a Viernes: de 09:00h. a 18:30h.
El horario de atención telefónica es de Lunes a Jueves: de 09:00h. a 14:00h. y de 15:30h a 18:20h., y los Viernes: de 8:00h. a 15:00h. y de 15:30h. a 18:20h.
Solo atenderemos en nuestras instalaciones a clientes con pedidos ya realizados, ya sea por teléfono o vía web, no haremos en persona ningun pedido nuevo

No aceptamos pagos con tarjeta en nuestras instalaciones

Gráficos de soluciones