CiudadWireless
Inicio Wireless Antenas Networking Voz sobre IP y telefonía COVID-19 Videovigilancia Multimedia Movilidad Domótica Formación Informática Software
Inicio » Catálogo » Voz sobre IP y telefonía » Teléfonos y terminales » Teléfonos IP » CP-6851-3PW-CE-K9= | | Mi Cuenta | Ver Cesta | Realizar Pedido
Búsqueda Rápida
 
Búsqueda Avanzada
Categorias
 Wireless
 Antenas
 Networking
 Voz sobre IP y telefonía
   Accesorios VozIP
   Adaptadores ATA
   Auriculares
   Centralitas PBX
   Controladores de alta disponibilidad
   Gateways
   Licencias VoIP
   Líneas y servicios VozIP
   Megafonía / Hilo musical
   Personas mayores
   Porteros / Videoporteros
   RDSI
   Routers + VozIP
   Sistemas DECT
   Sistemas Multicelda
   Tarjetas RDSI / VozIP
   Teléfonos y terminales
     Accesorios teléfonos
     Fuentes de alimentación teléfonos
     Teclados de expansión
     Teléfonos analógicos
     Teléfonos DECT
     Teléfonos IP
     Teléfonos IP WiFi
     Teléfonos USB / Skype
     Smartphones y móviles
   Video / Audioconferencia
 COVID-19
 Videovigilancia
 Multimedia
 Movilidad
 Domótica
 Formación
 Informática
 Software
Fabricantes
Compras más
0 productos
Notificaciones más
NotificacionesNotifiqueme de cambios a Cisco CP-6851-3PW-CE-K9= Teléfono IP firmware multiplataforma y 4 cuentas SIP. PSU incluida, botonera KEM opcional no incluida
Comentarios más
Escribir ComentarioEscriba un comentario para este producto
Webs amigas
Seguridad Wireless
elhacker.net
Información
Blog Gatuno
Envios/Devoluciones
Política de privacidad
Condiciones de uso
Contactenos
Datos Bancarios
Ofertas de Empleo
Alta de distribuidores
Política de Cookies
Como Llegar
Idiomas
Español
 Cisco CP-6851-3PW-CE-K9= Teléfono IP firmware multiplataforma y 4 cuentas SIP. PSU incluida, botonera KEM opcional no incluida
[CP-6851-3PW-CE-K9=]

Precio: 216.93EUR 100.43EUR
IVA:21.09
Precio total: 121.52

2/3 Dias

CP-6851-3PW-CE-K9=
Cisco IP Phone 6851, 4 cuentas SIP, fuente de alimentación incluida

Nota:
Admite botonera adicional (KEM) no incluida. Puede adquirirse aparte en la referencia CP-68KEM-3PCC=

 

El firmware de teléfono multiplataforma posibilita el funcionamiento con sistemas de control de llamadas de terceros. El conjunto de funciones disponible con este firmware no es idéntico al del firmware diseñado y creado para el uso con los sistemas de control de llamadas de Cisco, pero sí muy similar. Los teléfonos solicitados como teléfonos multiplataforma no funcionan con el control de llamadas de Cisco.

The Cisco® IP Phone 6800 Series with Multiplatform Phone (MPP) Firmware is a cost-effective, high-fidelity voice communications portfolio designed to improve your organization’s person-to-person communications while reducing your operating costs on approved Unified- Communications-as-a-Service (UCaaS) platforms.

The 6800 Series combines an attractive, new ergonomic design with “always-on” reliability and secure encrypted communications. The phones deliver advanced IP telephony features and wideband audio capabilities with an easy-to-use, full-featured voice communications experience.

The Cisco IP Phone 6800 Series provides four phone models (and an optional Key Expansion Module) to the Cisco Multiplatform Phone (MPP) portfolio:

● Cisco IP Phone 6821 with Multiplatform Firmware, supporting two SIP registrations
● Cisco IP Phone 6841 with Multiplatform Firmware, supporting four SIP registrations
Cisco IP Phone 6851 with Multiplatform Firmware, supporting four SIP registrations, supports the Key Expansion Module (KEM)
● Cisco IP Phone 6861 with Multiplatform Firmware, supporting four SIP registrations, supports Wi-Fi function.
● Cisco IP Phone 6871 with Multiplatform Firmware, supporting six SIP registrations

Cisco IP Phone 6800 Key Expansion Module product overview

The Cisco IP Phone 6800 Key Expansion Module (KEM) extends the capabilities of the Cisco IP Phone 6851 with additional buttons. This module adds 14 physical buttons along with access to 14 additional buttons via the page buttons, for a total of 28 additional buttons. The KEM supports the Programmable Line Key (PLK) function, but does not support any SIP registrations. Calls may be monitored and answered using the PLK function, but calls may not initiated from the KEM. The 6851 IP phone supports one KEM only.

The 6800 KEM comes with a foot stand and cable to connect it directly to the base device in a traditional side-by-side configuration

Cisco IP Phone 6800 Series product overview

The line buttons on each model are fully programmable. You can set up line buttons to support either SIP registrations, or call features, such as speed dialing. You can also boost productivity by handling multiple calls for each SIP registration, using the multiple-calls-per-line appearance feature. Tricolor LEDs on the line buttons support the calling features and make the phone simple to use.

Fixed function buttons on the 6800 series phones give you one-touch access to service, messaging, directory, hold/resume, transfer, and conference features. A full-duplex speakerphone lets you set up clear multiparty conferences for flexible, productive collaboration. The 6800 series provides exceptional noise isolation when used with a Cisco 500 Series Headset.

The Cisco IP Phone 6800 Series maintains the same usability standards and standards for a context-sensitive user experience as the Cisco IP Phone 7800 Series. The 6821 IP phone has a 2.5-inch (240x120-pixel) grayscale display with white backlighting for easy reading. The 6861 has a 3.2-inch (320x120-pixel) LCD. The 6841 and 6851 IP phones each have a high-resolution 3.5-inch (396x162-pixel) grayscale display with white backlighting. The 6871 IP phone has a high-resolution 3.5-inch (480x272-pixel) color LCD. Localized language support is available for global users. See Table 6 for a list of available languages.

The 6800 Series is also energy-efficient and eco-friendly, to support green initiatives. The 6821 and 6851 support Power over Ethernet (PoE) Class 2. The 6871 supports Power over Ethernet (PoE) Class 3. The 6821, 6841, 6851, 6861 and 6871 are Energy Star certified. The 6841, 6851, 6861 and 6871 support a power-save option that reduces power consumption during off-hours, saving costs by increasing energy efficiency.

The 6861 phone is Wi-Fi enabled phone in 6800 series. It supports built-in dual band Wi-Fi up to 802.11n. Also provides reliable wireless connection and convenient connection to access point via WPS (Wi-Fi Protected Setup).

The 6800 Series is ideal for businesses that want to update their phone systems from traditional analog or digital-based systems to an IP communications system with supported multiplatform call control systems.

Table 1. Cisco IP Phone 6800 Series features and benefits

Feature

Benefits

Hardware features

Ergonomic design

● An easy-to-use interface that provides a traditional telephony-like user experience.

Graphical display

● 6821: White backlit, grayscale, 2.5-in. (6.4-cm) 240 x 120-pixel display.

● 6841 and 6851: White backlit, grayscale, 3.5-in. (9-cm) 396 x 162-pixel display.

● 6861: White backlit, grayscale, 3.2-in. (8.1-cm) 320 x 120-pixel display.

● 6871: 3.5-in.(9-cm) 480 x 272-pixel color display.

● Scrollable access to calling features and text-based XML applications.

Handset

● 6821: Supports a narrowband audio handset connected through an RJ-9 port.

● 6841 and 6851: Supports either a narrowband or a wideband audio handset connected through an RJ-9 port.

● 6861 and 6871: Supports a wideband audio handset connected through an RJ-9 port.

● All 6800 series handsets are Hearing-Aid-Compatible (HAC) and meet Federal Communications Commission (FCC) loudness requirements for the Americans with Disabilities Act (ADA). You can meet Section 508 loudness requirements by using industry-standard inline handset amplifiers such as Walker Equipment W-10 or CE-100 amplifiers. The dial pad on all 6800 series models is also ADA-compliant.

● The 6800 series handsets produce a magnetic field that attracts small metallic objects such as pins and staples. To avoid possible injuries, do not keep small metallic objects close to the handset.

Headset

● The 6800 series provides exceptional noise isolation when used with a Cisco 500 Series Headset.

● The analog headset jack is a wideband-capable RJ-9 audio port for the 6821, 6841, 6851, 6861 and 6871 models.

Backlit indicator

● 6821: Backlit line buttons and a message waiting indicator; uses icons on the LCD to indicate activation of the headset, mute, and select buttons.

● 6841 6851 and 6861: Backlit indicators on the audio path keys (handset, headset, and speakerphone), mute key, select key, line keys and message waiting.

Volume control

● A volume-control toggle provides easy decibel-level adjustments of the handset, monitor speaker, and ringer.

Full-duplex speakerphone

● A full-duplex speakerphone gives you flexibility in placing and receiving calls. For added security, the Audible Dual-Tone Multi-frequency (DTMF) tones are masked when the speakerphone mode is used.

Single-position foot stand

● The foot stand holds the phone in a single position, making the display easy to view and the buttons easy to use while sitting down. You can remove the foot stand for wall mounting. There are mounting holes located on the back of the phone.

Wall-mountable

● 6821: Can be mounted directly to the wall using woodscrews and anchors for drywall.

● 6841 6851 6861 and 6871: Can be wall-mounted using the optional 6800 Series wall-mount kit (sold separately).

Electronic hook switch

● 6851 6861 6871: Electronic hookswitch headset support via its auxiliary port.

USB

● 6871 has USB-A port on the back for Cisco headset support.

Keys

● The 6821, 6841, 6851, 6861 and 6871 have the following keys:

◦ Lines

◦ Softkeys

◦ Two-way navigation and select

◦ Service

◦ Standard keypads

◦ Volume control toggle

◦ Speakerphone, headset, and mute

◦ Other than the primary line assignment on the first line key, the other keys may be configured as user-customizable, or system administrator-customizable Programmable Line Keys (PLKs)

● Additionally, the 6841, 6851, 6861 and 6871 have:

◦ Hold/resume, transfer, and conference

◦ Messaging, Directory

Ethernet cables

● The 6821, 6841, 6851 and 6861 support the following Ethernet cables:

◦ Category 3, 5, 5e, and 6 for 10-Mbps cables with 4 pairs

◦ Category 5, 5e, and 6 for 100-Mbps cables with 4 pairs

● Additionally, the 6841, 6851 and 6871 support:

◦ Category 3, 5, 5e, and 6 for 1000-Mbps cables with 4 pairs

Power features

IEEE PoE

● The 6821 and 6851 support IEEE 802.3af PoE (Class 2); power consumption does not exceed 6.49W.

● The 6871 supports IEEE 802.3af PoE (Class 3); power consumption does not exceed 12.95W.

● The 6841 and 6861 support wall power only through an included, regional power adapter.

Power adapter with country clips

● 6800 Series regional power adapters are available for powering the 6821, 6841, 6851, 6861 and 6871 when used in non-PoE deployments.

Cisco power injector

● The 6851 and 6871 are compatible with the Cisco Unified IP Phone Power Injector (CP-PWR-INJ), and with the Cisco Aironet ® Power Injector (AIR-PWRINJ5=).

Cisco IP Phone 6800 Key Expansion Module features and benefits

Table 2 lists the features and benefits of the Cisco IP Phone 6800 Key Expansion Module.

Table 2. Cisco IP Phone 6800 Key Expansion Module features and benefits

KEM feature

Benefits

Illuminated buttons

Off (dark)

Button is not configured

Green, steady

Configured correctly and is in the idle state

Red, steady

In use and has an active call on it or has a parked call

Amber, flashing

A configuration error has occurred for this button

Illuminated page buttons

Off (dark)

Page not in focus

Green, steady

Page in focus

Amber, flashing

Page not in focus, with one or more alerting or on-hold calls present on page

Hardware and power-saving features

Graphical display

Two 3.5-in (9-cm) grayscale backlit LCD displays, 160 x 270 resolution

Directory number and feature buttons

The module has 14 physical buttons (28 using page keys)

Page buttons

Use the 2 page buttons to access each page of 14 buttons and provide phone status

Power save mode

When the Cisco IP Phone 6851 is placed in power save mode, the 6800 KEM is also placed in power save mode. Pressing the select button while the phone and KEM are in power save mode will restart both the phone and the KEM

Supported features

Table 3 lists the features supported in the multiplatform phone firmware.

Table 3. Features supported in the multiplatform phone firmware

Feature

Detail

Audio

● Codecs: G.711 (A-law and m-law), G.722.2, G.722, G.729 (a, b, ab), ILBC, iSAC, OPUS

● DTMF: In-band, out-of-band (RFC 2833), and SIP INFO

● MOS Score Reporting (Telchemy)

Network

● MAC address (IEEE 802.3)

● SIP protocol support (RFC 3261 and companion RFCs)

● IPv4 (RFC 791)

● IPV6 (RFC 2460): System Interoperability Testing Required

● DNS: A record (RFC 1706), SRV record (RFC 2782)

● Dynamic Host Configuration Protocol (DHCP) (RFC 2131)

● Simple Network Time Protocol (SNTP) (RFC 2030)

● Network Address Translation (NAT) traversal, serial tunnel (STUN)

● User Datagram Protocol (UDP) and TCP

● Link Layer Discovery Protocol (LLDP)

● Cisco Discovery Protocol

● TR.69 provisioning: System Interoperability Testing Required

Security

● Certificates

● Image authentication

● File authentication

● 802.1X authentication

● Transport Layer Security (TLS)

● Media encryption via Secure Real-Time Transport Protocol (SRTP) with Advanced Encryption Standard (AES-128 or AES-256)

● Signaling encryption using TLS with AES-128 or AES-256

● Encrypted configuration files

● Digest authentication

● Password login

● HTTPs secure provisioning

● Encrypted HTTP data in plain HTTP transmissions

● Mandatory/Optional Secure call

Applications

● Cisco XML Services Interface (XSI)

● Cisco UC-One Presence

Call control and audio features

● Busy Lamp Field (BLF) [1]

● Call back on busy

● Call blocking – anonymous and selective

● Call conferencing – hosted (N-party) 1

● Call conferencing – local 3-way

● Call forwarding – unconditional, no answer, on busy

● Call hold

● Call pickup – selective and group 1

● Call park and unpark 1

● Call transfer – attended or blind

● Call waiting

● Caller ID name and number and outbound caller ID blocking

● Caller ID mapping for incoming calls

● Configurable dial/numbering plan support with inter-digit timers – per line

● Configurable supplementary services soft keys

● Distinctive ringing based on calling and called number

● Do not disturb

● Early Media and Preconditions (Cisco BroadWorks R23 feature support)

● Extension mobility/hot-desking 1

● Group paging 1

● Hoteling 1

● Intercom 1

● Individual volume setting per audio path (headset, handset, or speaker)

● Multicast paging

● Music on hold 1

● Outbound caller ID blocking

● Visual Voice Message Waiting Indicator (VMWI)

Shared/bridge line appearance 1

● Exective/Admin Assistant

● Supplementary services feature activation codes

Directory

● Local phonebook

● XML/Lightweight Directory Access Protocol (LDAP) remote directory

● Broadsoft directory

● Intelligent search

● Call history

● Reverse address lookup in all directories

Management

● Configuration: Browser, phone, auto-provision

● Auto-provision via TFTP, HTTP, or HTTPs for mass deployment

● Encrypted Content Encoding over HTTP

● Packet capture, Problem Reporting Tool (PRT) and upload of PRT

● Remote generation and upload of PRT data

Wi-Fi and Bluetooth

● Built-in dual band 2.4G and 5G Wi-Fi

● Wi-Fi standards 802.11a/b/g/n

● Wi-Fi security protocols: WEP, WPA-PSK, WPA2-PSK, EAP-FAST, PEAP-GTC, PEAP-MSCHAP2

● Will support Bluetooth headset in further release

Platform support

Table 4 lists the platforms supported by the multiplatform phone firmware.

Table 4. Supported platforms

Platforms supported

Certifications

Asterisk

Interoperability Tested – Release (11.x)

Broadsoft Broadworks

Interoperability Tested and Certified – Releases 19sp1, 20sp1, 21sp1, 22sp1

Broadcloud

Interoperability Tested and Certified

Centile

6821, 6861 and 6871: Support with Centile is road mapped

6841 and 6851: Interoperability Tested and Certified – Release Istra SP 9.2

Metaswitch

Interoperability Tested and Certified – Release 9.5

Interoperability Tested – Release 9.3 for 6821

Table 5. Features and specifications

Features

Specifications

Signaling protocol support

Session Initiation Protocol (SIP)

Full lines supported

6821: 2 lines (SIP registrations)
6841: 4 lines (SIP registrations)
6851: 4 lines (SIP registrations)
6861: 4 lines (SIP registrations)
6871: 6 lines (SIP registrations)

Language support

Bulgarian
Catalan
Chinese (Simplified)
Chinese (Traditional, Hong Kong)
Croatian
Czech
Danish
Dutch
English (American)
English (United Kingdom)
Finnish
French (France)
Greek
Spanish (Colombia)
German
Hungarian
Italian
Japanese
Korean
Norwegian
Polish
Portuguese (Portugal)
Spanish (Spain)
Slovak
Swedish
Slovenian
Turkish

Multiple ring tones

The phones support user-adjustable ring tones

Quality-of-Service (QoS) options

The phone supports Cisco Discovery Protocol and 802.1Q/p standards, and can be configured with an 801.1Q VLAN header containing the VLAN ID overrides configured by the admin VLAN ID

Security

Manufacture-Installed Certificates
Image authentication
Device authentication
File authentication
Encrypted configuration files
Signaling encryption using TLS with AES-128 or AES-256
Media encryption using SRTP with Advanced Encryption Standard AES-128 or AES-256
802.1X authentication

Configuration options

The user can configure the IP address assignment statically or through the DHCP client

Physical dimensions (HxWxD)

6821: 8.2 x 6.7 x 1.5 in. (207 x 171 x 37.5) (excluding foot stand)
6861: 8.2 x 8.1 x 1.3 in. (207 x 206 x 33 mm) (excluding foot stand)
6851: 8.2 x 10.4 x 1.3 in. (207 x 265 x 33 mm) (excluding foot stand)
6861: 8.2 x 8.1 x 1.3 in. (207 x 206 x 33 mm) (excluding foot stand)
6871: 8.2 x 8.1 x 1.3 in. (207 x 206 x 33 mm) (excluding foot stand)
6800 Key Expansion Module: 8.15 x 4.45 x 1.65 in. (207 x 113 x 42 mm)

Weight

6821: 16 oz. (456 g) (excluding foot stand, handset, and package), 18 oz. (512 g) (including foot stand, excluding handset and package)
6841: 22 oz. (615 g) (excluding foot stand, handset, and package), 24 oz. (682 g) (including foot stand, excluding handset and package)
6851: 22 oz. (615 g) (excluding foot stand, handset, and package), 24 oz. (682 g) (including foot stand, excluding handset and package)
6861: 21 oz. (602.8 g) (excluding foot stand, handset, and package), 23.6 oz (670 g)) (including foot stand, excluding handset and package)
6871: 21.3 oz. (604.4 g) (excluding foot stand, handset, and package), 23.9 oz (677.3 g)) (including foot stand, excluding handset and package)
6800 Key Expansion Module: 11.5 oz. (320 g)

Display

6821: 2.5 in. (6.4 cm), 240 x 120 pixels
6841 and 6851: 3.5 in. (9 cm), 396 x 162 pixels
6861: 3.2 in. (8.1 cm), 320x120 pixels
6871: 3.5-in.(9-cm) 480 x 272-pixel color display
6800 Key Expansion Module: Two 3.5-in (9-cm) grayscale backlit LCD displays, 160 x 270 resolution

Ethernet switch

6821: A 10/100BASE-T Ethernet connection through two RJ-45 ports; one for the LAN connection and the other for a downstream Ethernet device connection such as a PC
6841, 6851 and 6871: A 10/100/1000BASE-T Ethernet connection through two RJ-45 ports; one for the LAN connection and the other for a downstream Ethernet device connection such as a PC
6861: A 10/100BASE-T Ethernet connection through one RJ-45 port for the LAN connection

Phone and KEM casing composition

Polycarbonate Acrylonitrile Butadiene Styrene (ABS) textured plastic

Power requirements

6821, 6851: Interoperable IEEE 802.3af PoE (Class 2) devices. 5V DC is required; they can be supplied locally at the desktop using one of the optional AC-to-DC country-specific power supplies (such as the CP-6800-PWR-NA= for North America)
6841, 6861: Must be powered with the supplied 5V DC country-specific power supply (such as the CP-6800-PWR-NA= for North America), which is included with the phone
6871: Interoperable IEEE 802.3af PoE (Class 3) devices. 5V DC is required; It can be supplied locally at the desktop using one of the optional AC-to-DC country-specific power supplies (such as the CP-6800-PWR-NA= for North America)
6800 Key Expansion Module: No local power supply. The KEM receives power from the attached 6851 IP phone. The attached 6851 IP phone may be powered via PoE or the 6800 (5V) power adapter

Operational temperature

32° to 104°F (0° to 40°C)

Nonoperational temperature shock

14° to 140°F (-10° to 60°C)

Humidity

Operating 10% to 90%, noncondensing
Non-operating 10% to 95%, noncondensing

Certification and compliance for 6821

Regulatory compliance:
CE Markings per directives 2014/30/EU and 2014/35/EU
Safety:
UL 60950 Second Edition
CAN/CSA-C22.2 No. 60950 Second Edition
EN 60950 Second Edition (including A11 and A12)
IEC 60950 Second Edition (including A11 and A12)
AS/NZS 60950
EMC – Emissions
47CFR Part 15 (CFR 47) Class B
AS/NZS CISPR32:2015 Class B
CISPR 32: 2015_COR1:2016 Class B
EN55032: 2015+AC:2016
ICES003 Class B
EN61000-3-2:2014 and IEC 61000-3-2:2014
EN61000-3-3:2013 and IEC61000-3-3:2013
VCCI Class B
EMC – Immunity
EN55024
CISPR24
Armadillo Light
Telecom
FCC Part 68 HAC
CS-03-HAC
AS/ACIF S004
AS/ACIF S040
NZ PTC 220
Industry standards: TIA 810
Industry standards: IEEE 802.3 Ethernet, IEEE 802.3af

Certification and compliance for 6841, 6851, 6861 and 6871

Regulatory compliance:
CE Markings per directives 2004/108/EC and 2014/30/EU
Safety:
UL 60950 Second Edition
CAN/CSA-C22.2 No. 60950 Second Edition
EN 60950 Second Edition (including A11 and A12)
IEC 60950 Second Edition (including A11 and A12)
AS/NZS 60950
EMC – Emissions
47CFR Part 15 (CFR 47) Class B
AS/NZS CISPR32:2015 Class B
CISPR 32: 2015_COR1:2016 Class B
EN55032: 2015+AC:2016
ICES003 Class B
EN61000-3-2:2014 and IEC 61000-3-2:2014
EN61000-3-3:2013 and IEC61000-3-3:2013
EMC – Immunity
EN55024
CISPR24
Armadillo Light
Telecom
FCC Part 68 HAC
CS-03-HAC
AS/ACIF S004
AS/ACIF S040
NZ PTC 220
Industry standards: TIA 810 and TIA 920
Industry standards: IEEE 802.3 Ethernet, IEEE 802.3af (for CP-6851 only)
Radio (for CP-6861 only)
FCC Part 15
EN 300.328
EN 301-489-1
EN 301-489-17
EN 301-489-3
NCC LP0002
EN 301 893
EN 300 330
RSP-100-11
RSS- Gen
RSS-102
RSS-210
RSS-247-2
Cisco CP-6851-3PW-CE-K9= Teléfono IP firmware multiplataforma y 4 cuentas SIP. PSU incluida, botonera KEM opcional no incluida

Haga Click para agrandar
Para obtener más información, visite la página del producto.
Este producto esta en nuestro catálogo desde martes 25 febrero, 2020.
Comentarios
Stock:0
Fabricante
Cisco
Página de Cisco
Otros productos
Hazte distribuidor de CiudadWireless Confia tu proyecto con nosotros
Ofertas más
Meraki LIC-MX68-SEC-10YR Meraki MX68 Advanced Security License and Support, 10YR

Meraki LIC-MX68-SEC-10YR Meraki MX68 Advanced Security License and Support, 10YR
3,328.49EUR
2,582.45EUR
Cisco SMB SG350-10P-K9-EU Cisco SG350-10P 10-port Gigabit POE Managed Switch

Cisco SMB SG350-10P-K9-EU Cisco SG350-10P 10-port Gigabit POE Managed Switch
364.82EUR
184.08EUR
Meraki LIC-MS120-8FP-10YR Meraki MS120-8FP Enterprise License and Support, 10 Year

Meraki LIC-MS120-8FP-10YR Meraki MS120-8FP Enterprise License and Support, 10 Year
288.47EUR
208.89EUR
Meraki LIC-MX68CW-SEC-5YR Meraki MX68CW Advanced Security License and Support, 5YR

Meraki LIC-MX68CW-SEC-5YR Meraki MX68CW Advanced Security License and Support, 5YR
2,329.94EUR
1,807.71EUR
Meraki MS210-48-HW Meraki MS210-48 1G L2 Cld-Mngd 48x GigE Switch

Meraki MS210-48-HW Meraki MS210-48 1G L2 Cld-Mngd 48x GigE Switch
3,343.28EUR
2,421.00EUR

precios validos salvo error tipográfico, IVA NO INCLUIDO
Tlf: 910609721| Fax: 916932130

CIUDADWIRELESS INFORMÁTICA Y TELECOMUNICACIONES, S.L.
El horario de atención al público y recogida de pedidos es de Lunes a Viernes: de 09:00h. a 18:30h.
El horario de atención telefónica es de Lunes a Jueves: de 09:00h. a 14:00h. y de 15:30h a 18:20h., y los Viernes: de 8:00h. a 15:00h. y de 15:30h. a 18:20h.
Debido a las medidas de prevención por la incidencia del coronavirus, no atendemos presencialmente

Gráficos de soluciones