Precio: 41.26EUR 37.65EURIVA:7.91Precio total: 45.56Stock:0
DGS-712SFP 10/100/1000 BASE-T Copper Transceiver Converts SFP Interface to 1000Base-T Copper UplinkD-Links DGS-712 1000BASE-T Copper Small Form Pluggable (SFP) transceiver is based on the SFP Multi Source Agreement. It is compatible with the Gigabit Ethernet and 1000BASE-T standards as specified in IEEE 802.3z and 802.3ab. The DGS-712 plugs into any standard SFP interface allowing for 1000Base-T Gigabit transmission over standard Category 5 twisted pair copper.-Convert an SFP Fiber Interface into a 1000Base-T Copper Uplink-Hot Pluggable-IEEE 802.3ab 1000Base-T Compliant-Up to 1.25Gbps Bi-directional Data when Combined with an Additional DGS-712 Standard IEEE 802.3ab 1000BASE-T Gigabit EthernetTransceiver Type SFP (Small Form Pluggable)Connector RJ-45Auto MDI/MDIX Automatic crossover detection enabled External crossover cable not requiredData Rate 1,000 Mbps (IEEE 802.3 compatible) 10/100/1000 BASE-T operation requires the host system to have an SGMII interface with no clocks. With a SERDES interface, this transceiver will operate at 1000BASE-T onlyCable Type Cat. 5 twisted-pair cableMaximum Cable Distance Coverage 100 metersSupply Current 350mA (typical) 400mA (maximum) 1.3W max power over full range of voltage and temperatureInput Voltage 3.1V (minimum) 3.3V (typical) 3.5V (maximum) Referenced to GNDSurge Current 30mA Hot plug above steady state currentDimensions (W x D x H) .47” x 2.95” x .47” (11mm x 75mm x 11mm)Weight .53 lbs (0.2 kg)Operating Temperature 32° to 185° F (0° to 85° C)Storage Temperature -40° to 185° F (-40° to 85° C)Waranty 2-Year Limited11 2-Year Limited Warranty available only in the USA and Canada.All references to speed are for comparison purposes only. Product specifications, size and shape are subject to change without notice, and actual product appearance may differ from that depicted herein.