UMAC STATIONBOX XL CARRIER CLASS 5-19 (StationBox® XL CARRIER CLASS 5 GHz, 19dBi)
SBX-XL-CC-2-14
Nota: no confundir con familia STATIONBOX XL estándar
Nota: Cables no incluidos (recomendado
mínimo 15 cm.), siendo necesario adquirir 2 por antena, con conector MMCX
o UFL dependiendo de la tarjeta MiniPCI que vayamos a integrar.
Características generales de la familia UMAC STATIONBOX XL CARRIER CLASS
Válida para:
-RouterBoard™ 9 series
MikroTik™ RB911G-2HPnD*, RB912UAG-2HPnD*,RB911G-5HPnD*, RB912UAG-5HPnD*
-RouterBoard™ 7 series
RB711-2Hn, RB711-5Hn, RB711-5Hn-M, RB711-5Hn-U, RB711-2HnD, RB711-5HnD, RB711G-5HnD,
RB711UA-2HnD, RB711UA-5HnD, RB711GA-5HnD
-RouterBoard™ 4 series
RB411*, RB411GL*, RB411L*, RB411AH*, RB411AR*, RB411UAHR*
Outdoor Aluminium Enclosure with Integrated Dual Polarization Antenna, IP65
Rating and 3-Axis Mounting System.
StationBox® XL CARRIER CLASS is aluminium outdoor CPE antenna enclosure
designed to meet highest requirements on performance, durability and
environmental resistance. With built-in high gain dual polarization antenna,
NanoBracket® 3-Axis adjustable mount and IP65 environment resistance rating, it
is the most advanced integrated CPE solution on the market.
Aluminium Enclosure with IP65
StationBox® XL CARRIER CLASS is built to meet requirements for IP65 rating for
environmental resistance. Enclosure and base of NanoBracket® are made of die
cast aluminium. All hardware is made of Stainless Steel. Radome and plastic
parts are made of high quality outdoor rated ABS plastic. Ethernet connector is
outdoor rated and water resistant. Silicone gaskets are applied.
NanoBracket®
StationBox® XL CARRIER CLASS comes directly from factory equipped with
NanoBracket®, our ultimate mounting solution proven by more than 100.000 of
installations. 3-Axis NanoBracket® positioning system allows you to adjust the
position of StationBox® in three axis using ball hinge. StationBox® XL CARRIER
CLASS can be easily mounted on the pole or on the wall. 3-Axis Bracket uses ball
hinge with special fast locking system that can be operated with one hand, even
when wearing winter gloves.
Made For MikroTik™
StationBox® XL CARRIER CLASS is designed for seamless integration with MikroTik™
RouterBoards RB91x, RB71x and RB41x with integrated radios. The integration of
the board requires no tools and takes couple of seconds: just snap the board in.
Visibility of RouterBoard LEDs is maintained.
TECHNICAL DATA
Materials
UV stabilized and weather resistant ABS plastic
Aluminium
Flame Rating
UL 94 HB
Pole Mounting Diameter
50-70 mm
Operating Temp.
-25 to +60 °C
Wind Survival
160 Km/h
PACKAGE CONTENTS
StationBox® XL CARRIER CLASS
Waterproof Ethernet Connector
Bracket Body
Manual
Alan Key
Rubber Insert
4x Screw with Wall Plug
2x Hose Clamp
Características específicas del modelo StationBox® XL CARRIER CLASS 5 GHz,
19dBi (SBX-XL-CC-5-19)
Model
5 GHz
Product ID
SBX-XL-CC-5-19
Frequency Range
5450 - 5850 MHz
Gain Max
19.4 dBi
Gain Typical
19 dBi
Polarization
Horizontal / Vertical
Azimuth Beam Width -3dBi
H 14.5° / V 14.5°
Elevation Beam Width -3dBi
H 14.5° / V 15°
Front-to-Back Ratio
H 30° / V 30°
Cross Pol Isolation
H 18° / V 21°
Impedance
50 Ohm
Max. Input Power
10 W
VSWR Max
1.8
VSWR Typical
1.35
Isolation Between Ports
30 dBi
Antenna Connectors
2x MMCX