NS-0318P-135 PoE Switch

L2, Unmanaged, 16 100M PoE port, 1 1000M RJ45, 1 1000M SFP, 802.3af/at, PoE power budget 135W, "Extend" Mode: Port 9-16, max. 250m long distance transmission;

16x RJ45, 10/100 Base-T(X)(Data/Power)
1x 10/100/1000Base-T port(Data)
1x 1000Base-X SFP port

Ports 1 to 16 support IEEE 802.3af/IEEE 802.3at standard.
When the switch is in Priority mode, it optimizes the cache capability of the ports. Ports 1 - 8 are high-priority ports, and all ports can communicate with each other.
When the switch is in Standard mode, it is an ordinary switch, and all ports can communicate with each other.
When the switch is in Isolate mode, all downlink ports of the switch cannot communicate with each other and can only communicate with G1 port and SFP port respectively.
When the switch is in Extend mode, all ports can communicate with each other. In addition, the transmission rate of the ports 9 – 16 reduces to 10 Mbps. The maximum transmission distance is up to 250 meters.
All ports support 6 kV lightning protection.
This switch supports Auto MDI/MDIX.
This switch supports store-and-forward.
This switch supports MAC address auto learning and auto aging.
This switch supports smart cache optimization.
This switch supports rack mounting.

Port

Port amount
18

Port type
16*RJ45, 10/100 Base-T(X)(Data/Power)
1*10/100/1000Base-T port(Data)
1*1000Base-X SFP port

Standard
IEEE 802.3, IEEE 802.3u, IEEE 802.3x,IEEE 802.3af/at

Forwarding method
Store-and-forward

Flow control
Back-pressure flow control in IEEE 802.3x full duplex

Priority queue
8

MAC address table
4K

QoS
Supported on ports 1 and 8

Switching capacity
7.2Gbps

Packet forwarding rate
5.36Mpps

Physical appearance/structure

Appearance
0.6 mm sheet of galvanized metal without electric fan

Weight
4.93kg

Dimension
294mm × 178mm ×44mm

Mounting type
Rack mounting