NS-0318P-135 PoE Switch
L2, Unmanaged, 16 100M PoE port, 1 1000M RJ45, 1 1000M SFP, 802.3af/at, PoE power budget 135W, "Extend" Mode: Port 9-16, max. 250m long distance transmission;
16x RJ45, 10/100 Base-T(X)(Data/Power)
1x 10/100/1000Base-T port(Data)
1x 1000Base-X SFP port
Ports 1 to 16 support IEEE 802.3af/IEEE 802.3at standard.
When the switch is in Priority mode, it optimizes the cache capability of the ports. Ports 1 - 8 are high-priority ports, and all ports can communicate with each other.
When the switch is in Standard mode, it is an ordinary switch, and all ports can communicate with each other.
When the switch is in Isolate mode, all downlink ports of the switch cannot communicate with each other and can only communicate with G1 port and SFP port respectively.
When the switch is in Extend mode, all ports can communicate with each other. In addition, the transmission rate of the ports 9 – 16 reduces to 10 Mbps. The maximum transmission distance is up to 250 meters.
All ports support 6 kV lightning protection.
This switch supports Auto MDI/MDIX.
This switch supports store-and-forward.
This switch supports MAC address auto learning and auto aging.
This switch supports smart cache optimization.
This switch supports rack mounting.
16*RJ45, 10/100 Base-T(X)(Data/Power)
1*1000Base-X SFP port
IEEE 802.3, IEEE 802.3u, IEEE 802.3x,IEEE 802.3af/at
Back-pressure flow control in IEEE 802.3x full duplex
MAC address table
Supported on ports 1 and 8
Packet forwarding rate
0.6 mm sheet of galvanized metal without electric fan
294mm × 178mm ×44mm