NS-0326P-225 24x 100M PoE port, 1x 1000M RJ45, 1x 1000M SFP

L2, Unmanaged, 24 100M PoE port, 1 1000M RJ45, 1 1000M SFP, 802.3af/at, PoE power budget 225W,"Extend" Mode: Port 17-24 250m

-Ports 1 to 24 support IEEE 802.3af/IEEE 802.3at standard.
-When the switch is in Priority mode, it optimizes the cache capability of the ports. Ports 1 - 8 are high-priority ports, and all ports can communicate with each other.
-When the switch is in Standard mode, it is an ordinary switch, and all ports can communicate with each other.
-When the switch is in Isolate mode, all downlink ports of the switch cannot communicate with each other and can only communicate with G1 port and SFP port respectively.
-When the switch is in Extend mode, all ports can communicate with each other. In addition, the transmission rate of the ports 17 – 24 reduces to 10 Mbps. The maximum transmission distance is up to 250 meters.
-All ports support 6 kV lightning protection.
-This switch supports Auto MDI/MDIX.
--This switch supports store-and-forward.
-This switch supports MAC address auto learning and auto aging.
-This switch supports smart cache optimization.
-This switch supports rack mounting.

 

Port

Port amount
26

Port type
24*RJ45, 10/100 Base-T(X)(Data/Power)
1*10/100/1000Base-T port(Data)
1*1000Base-X SFP port

Standard
IEEE 802.3, IEEE 802.3u, IEEE 802.3x,IEEE 802.3af/at

Forwarding method
Store-and-forward

Flow control
Back-pressure flow control in IEEE 802.3x full duplex

Priority queue
8

MAC address table
4K

QoS
Supported on ports 1 and 8

Switching capacity
8.8Gbps

Packet forwarding rate
6.55 Mpps

Physical appearance/structure

Appearance
0.6 mm sheet of galvanized metal without electric fan

Weight
5.39kg

Dimension
294mm × 215mm ×44mm

Mounting type
Rack mounting