The LANCOM ES-2126P is a managed Fast-Ethernet switch with 24x 10/100 Mbps Ethernet ports and two combo ports TP/SFP 10/100/1000 for Gigabit Ethernet connections. This switch features not only store-and-forward mode but also priority queuing, allowing network bandwidth to be reserved for certain data packets such as voice data. The overall power output of 185 Watts from the PoE supply greatly simplifies the network installation and can be divided flexibly between the 24 Fast-Ethernet ports.
The LANCOM ES-2126P provides power where it"s needed: The backplane can handle data throughput at up to 8.8 Gbps. A high- speed uplink is assured by the backbone connection via Gigabit ports. Speed is provided by very short latency times under 5μs as required by the switch to determine the output port for a certain input port. The power of the LANCOM ES-2126P is demonstrated by the size of the source address table: The switch stores and manages up to 8000 MAC addresses. The LANCOM ES-2126P is also custom designed for
network virtualization: It integrates perfectly into LANCOM"s Advanced Routing and Forwarding (ARF) and it supports up to 256 active VLANs.
Intelligent switches like the LANCOM ES-2126P can re- route data packets when network glitches occur. The rapid spanning tree algorithm takes care of this so fast that users do not notice any delay. Just as important as the rapid spanning tree algorithm is the efficient control of bandwidth. This ensures that important applications such as IP telephony are constantly provided with ample bandwidth to avoid interruptions to conversations. Conducting bandwidth control, the LANCOM ES-2126P prioritizes the data traffic according to predefined criteria (e.g. voice data or certain ports). The LANCOM ES-2126P has four- level prioritization to control the sequence of incoming and outgoing data traffic.
The LANCOM ES-2126P gives you the assurance that rogue clients cannot use this switch to gain access to your network. Configuring 802.1x access control for all ports ensures that unauthorized devices plugged into a switch port cannot gain access to the network. The LANCOM ES-2126P also features rigorous defenses against attacks such as MAC flooding: The MAC address learning limit can be set individually and provides reliable protection from attacks that make your switch a bottle-neck that is incapable of functioning
The LANCOM ES-2126P stands for easy operability without compromise on security. It is easy to manage the switch with the clearly structured, user- friendly Webconfig. Port mirroring allows the close observation of network traffic. And there"s yet more you can do: With the free LANCOM Management Tools LANconfig and LANmonitor, we offer not just direct access to the devices via Webconfig but also for direct observation of the ES-2126P in the network and monitoring of its functionality. The ES-2126P also features virtual stacking management (VSM) that allows you to manage up to 16 switches at one IP address.
The LANCOM ES-2126P rounds off your LANCOM network so that you benefit from a one- stop shop for first- class service. The ES-2126P seamlessly integrates into your existing infrastructure and benefits from monitoring with the free LANCOM Management Tools. Switch components such as the extremely quiet fans in the usual LANCOM high quality allow us to exceed legal warranty requirements and offer a 5- year warranty. And because we are certain that this switch will be operational for a long time to come, we have equipped it with future- ready hardware: You can optionally upgrade your switch with SFP modules. All of this comes to you with an optimal price/performance ratio.