Evolución del modelo
CCR1009-8G-1S-1S+. 1.2GHz 9 Core CPU, 2GB RAM, 1 x SFP+, 1 x SFP/RJ45
Combo-Port, 7 x 10/100/1000Base-T, 1 x microUSB, 1 x serial, Dual Power
Supply, RouterOS Level 6 License
The new updated revision of CCR1009 is here. We attempted to combine all the
customer feedback and best practice in CCR device manufacturing that we learned
over the last three years, since the first CCR1009 devices were
- the device now features only fully independent Ethernet ports each with a
direct connection to the CPU, allowing to overcome previous shared 1Gbit
limitation from switch-chip ports and utilize full
potential of CPU processing power on those ports.
- a single 1Gbit software interface that has two hardware interfaces - a SFP
cage and a Gigabit Ethernet port, allowing you to use any type of connection
available to you. Port also allows to switch from one
to another interface from software, or in event of disconnect, providing new,
unique hardware fail-over feature.
100Mbps SFP support
- this is our first device that supports 100BASE-LX/100BASE-SX/100BASE-BX fiber
modules, as well as standard 1.25G SFP modules.
- due to how ports are connected to CPU, new CCR1009 models can achieve higher
An update of MikroTik's CCR1009-8G-1S-1S+, the CCR1009-7G-1C-1S+ has removed
the switch-chip, leaving each of the 7 Gigabit Ethernet ports fully independent
and removing the 1Gbit limitation present in the previous model. The newer model
also features a combo-port, a single 1Gbit software interface that has two
hardware interfaces - an SFP cage and a Gigabit Ethernet port - allowing you to
use any type of connection available to you. The combo-port can also switch
between interfaces from software or can provide a unique hardware fail-over
feature in the event of a disconnect.
With ports now independently connected to the CPU, the CCR1009-7G-1C-1S+ is
capable of higher theoretical throughput than its predecessor, offering 18Gbps
instead of 16Gbps. The device also supports 100BASE-LX/100BASE-SX/100BASE-BX
fiber modules in addition to standard 1.25G SFP modules.
There are two IEC connector ports at the back of the device, allowing for
connection to a secondary power source for redundancy. Smart card is
supported, allowing you to store your private key for use in all features
that support Certificate based authentication. It also includes LCD
touchscreen, microSD and a SFP+ port for 10G connections.
Designed for rack mounting, the CCR1009-7G-1C-1S+ ships with racking ears.
CPU nominal frequency
TILE-Gx9, 9 cores, 1.2 GHz
Size of RAM
10/100/1000 Ethernet ports
Number of USB ports
Supported input voltage
18 V - 56 V
PCB temperature monitor
CPU temperature monitor
RouterOS, level 6 license
Max Power consumption
Ethernet/SFP combo port
USB slot type
microUSB type AB
2x IEC cord