ProSAFE® 8-Port 10/100/1000 PoE+ Smart Switch with 2 Gigabit SFP Ports
Standalone Smart Managed Switch Series, Switches with Essential L2 Features for SMB Networks
NETGEAR Smart Managed Switches offer powerful L2 and L2+/Layer 3 Lite features, great PoE functionality, and enhanced performance and usability. They are purposely designed for converged networks where voice, video, data are all carried on a single network platform. These switches are optimized for network efficiency, operational cost savings, and ease of management. These switches are the ideal solution even for the most advanced small and medium organizations looking for the best combination of features, performance, and value.
Designed for Converged Networks, Big or Small
PoE and PoE+ Support available for all configurations
Auto-Voice VLAN for fast and reliable deployment of VoIP
Auto-Video VLAN, following the same concept of Auto Voice, help speed up your deployment of IP-based surveillance systems
Static routing, helps route internal traffic for more efficient use of network resources
IGMP and MLD snooping, provides advanced multicast filtering
Build a Future-Proof Network with NETGEAR
Solid performance with a non-blocking architecture, 256 VLANs, 100 shared ACL entries, 32 static routes, and 512 Multicast Groups
Comprehensive IPv6 management, QoS and ACL, ensuring investment protection and a smooth migration to IPv6-based networking
PoE+ support on all PoE models with the GS510TLP, GS510TPP, GS418TPP and GS728TPP providing PoE+ support on all ports
The presence of SFP ports provide necessary fiber uplinks, while dedicated SFP ports on many models further builds uplink redundancy
Energy Efficient Ethernet (IEEE 802.3az) support for more energy savings when unused ports or short cables
Advanced QoS with IPv4/IPv6 ingress traffic filtering (ACLs) and prioritization (QoS - Diff Serv)
Dynamic VLAN assignment for easy user authentication and location-independent access to network
Network Development Made Easy
Auto Voice VLAN for easy development of VoIP
Auto Video for simple deployment of IP Surveillance
ACL Wizard for a guided tour to set up your network access control
Smart Control Center, a powerful tool for multi-switch discovery, deployment, monitoring and firmware upgrades
PoE Timer for scheduling the on/off time of your PoE powered devices
Smart IT, not Big IT
Easy to manage via web browser-based management GUI or Smart Control Center for multi-switch deployment
Standard-based technology, ensuring interoperability with any standard-based devices in the existing network
Dual firmware images, improving reliability and uptime to your network
Great choice of PoE options
As a leading provider of network equipment for SMBs, NETGEAR understands the importance of providing PoE options that can adapt to the business’s needs, whether in the hospitality, catering, education or retail domains.
IEEE 802.3at PoE+
PoE devices encompass VoIP phones, IP Security Cameras, Wireless access points, proximity sensors, door locks and other IoT devices. Wave 2 802.11ac access points and PTZ cameras increasingly require 30W (PoE+).
Dedicated SFP Fiber Uplinks
Dedicated SFP ports provide fiber uplinks without sacrificing any downlink Gigabit port. 4 SFP ports provide not only redundant uplinks, but can also build dual redundancy by a trunked uplink with link aggregation and failover.
8 PoE+ ports on GS510TLP and GS510TPP
Cautious spender organizations can now deploy PoE+ devices connected to a fanless switch, the GS510TLP and its reasonable 75W power budget. Others who buy infrastructure for the long term will prefer the GS510TPP and its 190W power budget providing headroom for the unforeseeable.
16 PoE+ ports on GS418TPP
240W future-proof PoE budget, slim design (3.94 inches, 10 cm deep) and Easy-Mount options allow for access point, IP camera or VoIP endpoint placement optimization and cabling efficiency, whether it's directly on a wall, attached to a pole, or mounted in a standard 19-inch rack.
Dynamic VLAN Assignment
IP phones and PCs can authenticate on the same port but under different VLAN assignment policies. Users are free to move around and enjoy the same level of network access regardless of their physical location in the network.
A simple way to provide segmentation of the network with internal routing through the switch – reserving the router for external traffic routing only, making the entire network more efficient.
Comprehensive IPv6 Support for Management, ACL and QoS
Build current network with future in mind. Ensure investment protection and a smooth migration to IPv6-based network without switch replacement.
Build current network with future in mind
Ensure investment protection and a smooth migration to IPv6-based network without switch replacement. Facilitate fast receiver joins and leaves for multicast streams. Save cost and improve network efficiency by ensuring multicast traffic only reaches designated receivers without the need of an extra Multicast router.
Robust Security Features
Build a secured, converged network with all types of traffic by preventing external attacks and blocking malware while allowing secure access for authorized users.
Port-based security by locked MAC
ACL filtering to permit or deny traffic based on MAC and IP addresses
Auto Voice and Auto Video
Automatic Voice over IP prioritization with Auto-VoIP simplifies most complex multi-vendor IP telephones deployments either based on protocols (SIP, H323 and SCCP) or on OUI bytes (default database and user based OUIs) in the phone source MAC address; providing the best class of service to VoIP streams (both data and signaling) over other ordinary traffic by classifying traffic, and enabling correct egress queue configuration. When deployed IP phones are LLDP-MED compliant, the Voice VLAN will use LLDP-MED to pass on the VLAN ID, 802.1P priority and DSCP values to the IP phones, accelerating convergent deployments.
Comprehensive QoS Features
Advanced controls for optimized network performance and better delivery of mission-critical traffics such as voice and video.
Port-based or 802.1p-based prioritization
Layer 3-based (DSCP) prioritization
Port-based ingress and egress rate limiting
Ensure IP address allocation integrity by allowing only clients with specific IP/MAC addresses to have access to the network.
Dual Firmware Images and Configuration Files
Dual firmware image and dual configuration file for transparent firmware updates / configuration changes with minimum service interruption.
Allows IT administrators to increase network security, better utilize network resources and conserve energy by scheduling or remotely controlling on/off of POE ports.
Ensure no exchange of unicast, broadcast, or multicast traffic between the protected ports on the switch, therefore, improve the security of your converged network where your sensitive phone conversation can stay private and your surveillance video clips can be forwarded to their designated storage device without leakage or alteration.
Auto Negotiation of speed and duplex modes
IEEE 802.3x Flow Control
Dynamic MAC address management
IEEE 802.1Q-based VLAN
Auto Voice VLAN
Auto Video VLAN (selected models)
VLAN routing (selected models)
QoS based on WRR, strict priority, or both
Port-based and IEEE 801.2p-based QoS
IPv4 and IPv6-based QoS
Rate Limiting (ingress, or egress)
Link Aggregation and LACP
MAC lockdown by number of MACs
IEEE 802.1x port authentication - MD5: FSS728TPv2, FS728TLP, GS108Tv2, GS110TP, GS510TP
IEEE 802.1x port authentication - EAP: GS510TLP, GS510TPP, GS418TPP, GS516TP, GS716Tv3, GS724Tv4, GS748Tv5, GS752TP
Dynamic VLAN Assignment
3 HTTPS /SSL versions (except FS728TLP)
TLS session (except FS728TLP)
IPv4, L4-based Access Control List (ACL)
IPv6-based ACL (except Fast Ethernet models)
IGMP snooping, v1, v2 and v3
IGMP Snooping querier
Blocking of unknown multicast traffic
Spanning Tree, Routing and Stacking
IEEE 802.1D, IEEE 802.1w RSTP and MSTP
Option to enable/disable BPDU flooding when STP is disabled
Static routing with 32 static routes (Selected models)
Hosted ARP table size of 1,024 (Selected models)
Reliability, Performance and Troubleshooting
Port mirroring both on ingress and egress traffic
Jumbo frame support
Broadcast Storm control
IEEE 802.1ab LLDP
Option to enable/disable the flooding of EAPOL when 802.1x is disabled
DNS client (except FS728TLP)
DHCP snooping (except FS728TLP)
Ping and traceroute client (except FS728TLP)
Energy Efficient Ethernet (IEEE 802.3az) compliant (Selected models)
Web browser-based management GUI
Smart Control Center Software for multi-switch management
IP Access List
Configurable Management VLAN
SNMP v1/v2c and v3
Standard MIBs (RFC1213, RFC1643, and RFC1493)
RMON group 1, 2, 3, 9
Firmware Upgrade through Smart Control Center (TFTP)
Firmware download (to switch) and upload (to server) through TFTP/HTTP
Configuration and Image Upload (to PC) through HTTP
Configuration Download (to Switch) thru TFTP/HTTP and upload (to server)
Memory & FLASH log
System password protection
Number of PoE ports
Total PoE Power budget (Watts)
Max MAC entries
VLAN (Number Supported)
Dynamic VLAN assignment
Host ARP table
Internal 100-240VAC 50-60Hz
Max consumption (Watts)
Acoustic Noise Level @25C (dBA)
0° to 50° C
328 x 169 x 43 mm