| |
|
WAP-654G |
|
|
IEEE802.11g 54Mbps 200mW High Power Access Point with full
functions(Client, Repeater, P2P, PMP), Detachable Antenna, W/Reverse SMA
Connector,Repetidor Universal |
| |
|
PheeNet
WAP-654G is an IEEE 802.11g 54Mbps High Power AP / Bridge with 2.4 GHz
Frequency. Not only WEP Security, it also has advanced WPA, WPA2,
IEEE802.1x, Disable SSID Broadcast, MAC Address filtering to ensure the
security of Wireless LAN.
WAP-654G equipped with Dipole Antenna with 2dBi Gain (Reverse SMA
Connector) and its High power availability 200mW enables user to build a
convenient, efficient, and bigger coverage wireless network. Moreover, the
WAP-654G can be set as AP, Bridge, Client, Repeater, and compatibilities of
Win 98,Win2000,WinME, and Win XP operation systems provide more flexibility
and mobility to users. For home users and small enterprises, it is no doubt
that WAP-654G is an ideal device to build a wireless LAN network
|
|
| |
1.4 Operation Modes : Access Point(AP), Client, WDS, AP + WDS modes
2. Support AP/Bridge Mode simultaneously
3. Fully Backwards Compatible with all 802.11b Wireless Network
4. 54Mbps, Up to 5X Faster than 802.11b Products
5. Support 200mW High Power
6. Support Power Over Ethernet
7. Wireless Distribution System(WDS) when running in Repeater mode
8. Maxmum Wireless Security with 802.1x, WPA, and AES
9. Maxmum Internet Security with IPSEC (DES,3DES,AES-128)
10. Support TPC
11. Support Signal Strength
|
|
|
|
Industrial
Standard |
|
|
|
Standard |
IEEE 802.11g
IEEE 802.11b
IEEE 802.11
IEEE 802.3u 100Base-TX Fast Ethernet
ANSI/IEEE 802.3 N-way Auto-Negotiation
|
|
|
|
Interface |
100/10 Base-TX (RJ-45) x 1 |
|
|
|
Security |
- 802.1x, WEP,WPA TKIP, WPA2 AES/Mixed mode for PSK and TLS(Radius)
-WDS supported with WEP,TKIP and AES encryption
- Wireless access control by MAC address (deny or accept) |
|
|
|
RF |
|
|
|
Frequency Band |
2.412~2.472 GHz ISM band |
|
|
|
Signal Type & Modulation |
802.11g: OFDM (64QAM, 16QAM, QPSK, BPSK)
802.11b : DSSS(CCK, DQPSK,DBPSK)
|
|
|
|
Antenna |
Dual detachable Antenna (Reverse SMA Connector) |
|
|
|
Output Power |
200mW |
|
|
|
Transmit Power Variation |
100%, 50%, 25%, 10%, 5% |
|
|
|
Sensitivity |
802.11b
1Mbps: -91dBm, 2Mbps: -90dBm, 5.5Mbps:-89dBm, 11Mbps:-87dBm
802.11g
6Mbps:-84dBm, 9Mbps:-82dBm, 12Mbps:-79dBm, 18Mbps:-77dBm, 24Mbps:-75dBm,
36Mbps:-73dBm, 48Mbps:-70dBm, 54Mbps:-68dBm
|
|
|
|
Channels |
By Country (IEEE802.11d) |
|
|
|
Operating Mode |
AP Mode : 802.11b/g Access Point(AP)
Repeater Mode: WDS Repeater , Universal Repeater
Bridging Mode : P2P, PTMP,
Client Mode :
Ad-Hoc and infrastructure mode
Support Radius client used in client mode
Support site survey scan and manual connect
Support MAC Clone
|
|
|
|
Management |
Web configuration |
|
|
|
Hardware |
|
|
|
POE |
Splitter of POE Built-in |
|
|
|
Base Platform |
RL8186+ RL2560 (MIPS R3000 ISA-1 ) |
|
|
|
Clock Speed |
200 MHz |
|
|
|
Reset Switch Built-in |
Push-button momentary contact switch |
|
|
|
SDRAM |
On board : 8Mbytes |
|
|
|
Flash |
On board : 2Mbytes |
|
|
|
Built-In LED Indicators |
Power Status always On / Blinking: while upgrading firmware
Ethernet On: Blinking: Active
Wireless Blinking : Active
|
|
|
|
Environment |
Operating Temperature:0~50?
Storage Temperature:0~70?
Humidity: 5%~95%(non condensing)
|
|
|
|
Power Supply |
12 VDC, 1A input |
|
|
|
Dimensions |
112 (L) x 73(W) x 31(H) (mm) |
|
review en ForoWifi
review en Zero13 |
Haga Click para agrandar |
|
