Inicio Wireless Networking Voz sobre IP y telefonía ADSL Multimedia Videovigilancia Movilidad Domótica Informática Software Smartphones Formación
Inicio » Catálogo » Networking » Switches / Hub » Switches con PoE » Switches 48 bocas PoE » SFE2010P-G5 | | Mi Cuenta | Ver Cesta | Realizar Pedido
Búsqueda Rápida
Búsqueda Avanzada
   Accesorios Networking
   Adap. Corriente
   Adaptadores ethernet
   Balanceadores de carga
   Cableado Fibra Optica
   Cableado RJ45
   Conversores de medios
   Firewalls / UTM / Appliances
   Fuentes de alimentacion redundantes
   KVM Switches
   Modems Analógicos
   PLC - Powerline
   PON (Fibra óptica pasiva)
   Routers Neutros
   Routers/Firewalls VPN
   Servidores de impresión
   Software / Licencias / Garantia
   Switches / Hub
     Accesorios Switching
     Switches 16 puertos Gestionables
     Switches 16 puertos No gestionables
     Switches 24 puertos Gestionables
     Switches 24 puertos No gestionables
     Switches 48 puertos Gestionables
     Switches 48 puertos No gestionables
     Switches 5 Puertos Gestionables
     Switches 5 Puertos No gestionables
     Switches 8 Puertos Gestionables
     Switches 8 Puertos No gestionables
     Switches con PoE
       Switches 12 bocas PoE
       Switches 16 bocas PoE
       Switches 24 bocas PoE
       Switches 4 bocas PoE
       Switches 48 bocas PoE
       Switches 8 bocas PoE
       Switches menos de 4 bocas PoE
     Switches de chasis
     Switches industriales
   LTE - 3G - UMTS - HSDPA
 Voz sobre IP y telefonía
Compras más
0 productos
Notificaciones más
NotificacionesNotifiqueme de cambios a Cisco SMB SFE2010P-G5 48-port 10/100 Stackable Ethernet Switch with PoE
Comentarios más
Escribir ComentarioEscriba un comentario para este producto
Webs amigas
Seguridad Wireless
Blog Gatuno
Política de privacidad
Condiciones de uso
Datos Bancarios
Ofertas de Empleo
Alta de distribuidores
Política de Cookies
Como Llegar
 Cisco SMB SFE2010P-G5 48-port 10/100 Stackable Ethernet Switch with PoE

Precio: 1,904.00EUR
Precio total: 2,303.84


Product Overview

The Cisco® SFE2010P 48-Port 10/100 Ethernet Switch (Figure 1) allows you to expand your network securely. It is optimized for maximum system availability, with fully redundant stacking, redundant power options, and dual images for resilient firmware upgrades. Network security is provided through IEEE 802.1Q VLANs, IEEE 802.1X port authentication, access control lists (ACLs), denial-of-service (DoS) prevention, and MAC-based filtering. Web-based configuration is secured using SSL. The enhanced quality of service (QoS) and traffic-management features help ensure clear and reliable voice and video communications.
For wireless or voice over IP (VoIP) deployments, the Cisco SFE2010P supports the IEEE 802.3af standard for Power over Ethernet (PoE). Automatic load sensing in the power-control circuitry detects PoE on the end device before providing power. For safety, each port has independent overload and short-circuit protection, along with LED indicators to show power status. The switch provides 15W of available PoE power on up to 24 of the Fast Ethernet ports for powering PoE-enabled wireless access points or VoIP handsets. The maximum PoE available per switch for all ports is 360W
The Cisco SFE2010P provides resilient stacking for up to four units, or 192 ports. A stack of units is managed as a single switch with one web management interface. The SFE2010P switch can coexist in a stack with the Cisco SFE2000 and SFE2000P 24-Port 10/100 Ethernet Switches and the Cisco SFE2010 48-Port 10/100 Ethernet Switch, for a maximum of 192 ports in a stack. The stacking capability includes master/backup unit behavior, ring and chain architecture, and hot insertion and removal of units.
Software running on the Cisco SFE2010P switch interacts with provisioning, management, and security software on both the site"s services router and the service provider"s equipment. This interaction provides simple, one-step installation and access to web-administered features for the administrator and users. Simple, affordable network operations throughout the network"s lifetime are the result.


• Forty-eight 10/100 Ethernet ports

• Two 10/100/1000 Ethernet ports (used as stacking ports if operated in stacking mode)

• Two mini Gigabit Interface Converter (mini-GBIC) slots for fiber Gigabit Ethernet expansion

• IEEE 802.3af PoE delivered over any of the forty-eight 10/100 ports

• 15.4W available power to the Fast Ethernet ports for PoE-enabled wireless access points or VoIP handsets (maximum per-switch PoE delivery of 360W available for all ports)

• Dual images for resilient firmware upgrades

• 17.6-Gbps, nonblocking, store-and-forward switching capacity

• Simplified QoS management enabled by queuing techniques using 802.1p, Differentiated Services (DiffServ), or type of service (ToS) traffic prioritization

• Power redundancy when used with the Cisco RPS1000 380W Redundant Power Supply Unit

• Fully resilient stacking for optimized growth with simplified management

• ACLs for granular security and QoS implementation

• Configuration and monitoring from a standard web browser

• Secure remote management of the switch via Secure Shell (SSH) and SSL encryption

• 802.1Q-based VLANs enable segmentation of networks for improved performance and security

• Private VLAN Edge (PVE) simplifies network isolation of guest connections or autonomous networks

• Automatic configuration of VLANs across multiple switches through Generic VLAN Registration Protocol (GVRP) and Generic Attribute Registration Protocol (GARP)

• User/network port-level security via 802.1X authentication and MAC-based filtering

• Increased bandwidth and added link redundancy with Link Aggregation Control Protocol (LACP)

• Enhanced rate-limiting capabilities, including back pressure and multicast and broadcast flood control

• Port mirroring for noninvasive monitoring of switch traffic

• Mini jumbo frame support (1632 bytes)

• Simple Network Management Protocol (SNMP) versions 1, 2c, and 3 and Remote Monitoring (RMON) support

• Fully rack mountable using included rack-mounting hardware


Table 1 gives the specifications, package contents, and minimum requirements for the Cisco SFE2010P 48-Port 10/100 Ethernet Switch.

Table 1. Specifications for the Cisco SFE2010P 48-Port 10/100 Ethernet Switch: PoE



48 RJ-45 connectors for 10BASE-T/100BASE-TX; two 10BASE-T/100BASETX/1000BASE-T ports; 2 mini-GBIC ports; console port; auto medium dependent interface (MDI) and MDI crossover (MDI-X); auto negotiate/manual setting; RPS port for connecting to redundant power supply unit


Reset button

Cabling type

Unshielded twisted pair (UTP) Category 5 or better for 10BASE-T/100BASE-TX; UTP Category 5e or better for 1000BASE-T


PWR, Fan, Link/Act, PoE, Speed, RPS, Master, Stack ID 1 through 8

Power over Ethernet

• IEEE 802.3af PoE delivered over any of the forty-eight 10/100 ports
• Maximum power of 15.4W to a Fast Ethernet port - 360W total available to all Fast Ethernet ports with regular AC power, 280W total available with a redundant power supply unit


Switching capacity

17.6 Gbps nonblocking

Forwarding capacity

13 mpps (64-byte packets)


Stack operation

• Up to 192 ports in a stack
• Hot insertion and removal
• Ring and chain stacking options
• Master and backup master for resilient stack control
• Auto-numbering or manual configuration of units in stack

Layer 2

MAC table size


Number of VLANs

256 active VLANs (4096 range)


Port-based and 802.1Q tag-based VLANs, protocol-based VLAN, management VLAN, multicast TV VLAN, PVE, GVRP

Head-of-line (HOL) blocking

HOL blocking prevention

Layer 3

Layer 3 options

Static routing; classless interdomain routing (CIDR); 60 static routes; IPv4 and IPv6; forwarding in silicon - wire-speed forwarding of Layer 3 traffic


IPv6 options

IPv6 over Ethernet, dual stack, IPv6 over IPv4 network with Intra-Site Automatic Tunnel Addressing Protocol (ISATAP) tunnel, IPv6 neighbor discovery, IPv6 stateless address configuration, maximum transmission unit (MTU) discovery, WEB, SSL, Telnet, Ping, Traceroute, Simple Network Time Protocol (SNTP), Trivial File Transfer Protocol (TFTP), Simple Network Management Protocol (SNMP), RADIUS, ACL, QoS, protocol-based VLANs


Web user interface

Built-in web user interface for easy browser-based configuration (HTTP/HTTPS)


SNMP versions 1, 2c, and 3 with support for traps


RFC1213 MIB-2, RFC2863 interface MIB, RFC2665 Ether-like MIB, RFC1493 bridge MIB, RFC2674 extended bridge MIB (P-bridge, Q-bridge), RFC2819 RMON MIB (groups 1, 2, 3, and 9 only), RFC2737 entity MIB, RFC 2618 RADIUS client MIB, RFC 1215 traps


Embedded RMON software agent supports 4 RMON groups (history, statistics, alarms, and events) for enhanced traffic management, monitoring, and analysis)

Firmware upgrade

• Web browser upgrade (HTTP/HTTPS) and TFTP
• Dual images for resilient firmware upgrades

Port mirroring

Traffic on a port can be mirrored to another port for analysis with a network analyzer or RMON probe.

Other management

Traceroute; single IP management; SSL security for web user interface; SSH; RADIUS; port mirroring; TFTP upgrade; Dynamic Host Configuration Protocol (DHCP) client; BOOTP; SNTP; Xmodem upgrade; cable diagnostics; Ping; syslog; Telnet client (SSH secure support)


IEEE 802.1X

802.1X - RADIUS authentication, MD5 hash; guest VLAN; single/multiple host mode


• Drop or rate limit based on source and destination MAC or IP address, protocol, port, VLAN, DSCP/IP precedence, TCP/ User Datagram Protocol (UDP) source and destination ports, 802.1p priority, Ethernet type, Internet Control Message Protocol (ICMP) packets, Internet Group Management Protocol (IGMP) packets, DHCP snooping, Address Resolution Protocol (ARP) inspection, and IP source address guard
• Up to 1018 rules


Link aggregation

Using IEEE 802.3ad LACP, up to 8 ports in up to 8 groups

Storm control

Broadcast, multicast, and unknown unicast

Spanning Tree

IEEE 802.1D Spanning Tree, IEEE 802.1w Rapid Spanning Tree, IEEE 802.1s Multiple Spanning Tree, and Fast Linkover

DoS prevention

DoS attack prevention

IGMP (versions 1 and 2) snooping

Limits bandwidth-intensive multicast traffic to only the requestors; supports 256 multicast groups

Power redundancy

Connection to redundant power supply unit for power redundancy

Quality of Service

Priority levels

4 hardware queues


Priority queuing and weighted round-robin (WRR)

Class of service

Port based; 802.1p VLAN priority based; IPv4/v6 IP precedence/ToS/DSCP based; DiffServ; classification and re-marking ACLs

Rate limiting

Ingress policer; egress rate control; per VLAN


16 meters


802.3 10BASE-T Ethernet, 802.3u 100BASE-TX Fast Ethernet, 802.3ab 1000BASE-T Gigabit Ethernet, 802.3z Gigabit Ethernet, 802.3x flow control, 802.3ad LACP, 802.3af PoE, 802.1D Spanning Tree Protocol (STP), 802.1Q/p VLAN, 802.1w Rapid STP, 802.1s Multiple STP, 802.1X port access authentication



W x H x D

17.32 x 14.70 x 1.73 in.

(440 x 375 x 44 mm)

Unit weight

10.89 lb (4.94 kg)


100-240V 47-63 Hz, internal, universal; also equipped with external redundant power supply connector for external power supply, -48V DC


UL (UL 60950), CSA (CSA 22.2), CE mark, FCC Part 15 (CFR 47) Class A

Operating temperature

32° to 104°F (0° to 40°C)

Storage temperature

-4° to 158°F (-20° to 70°C)

Operating humidity

10% to 90%, relative, noncondensing

Storage humidity

10% to 95%, relative, noncondensing

Package Contents

• Cisco SFE2010P 48-Port 10/100 Ethernet Switch
• AC power adapter with power cord
• 2 rack-mounting kits with 8 screws
• CD-ROM with user documentation (PDF) included
• Registration card
• Console cable

Minimum Requirements

• Web browser: Mozilla Firefox version 1.5 or later; Microsoft Internet Explorer version 5.5 or later
• Category 5 Ethernet network cable
• TCP/IP, network adapter, and network operating system (such as Microsoft Windows, Linux, or Mac OS X) installed on each computer in the network
• Provider support for CPE software version 1.2 or later

Product Warranty

5-year limited hardware warranty with return to factory replacement and 90-day limited software warranty


Check the product package and contents for specific features supported. Specifications are subject to change without notice.

Cisco Limited Warranty for Cisco Small Business Series Products

This Cisco Small Business product comes with a 5-year limited hardware warranty with return to factory replacement and a 90-day limited software warranty. In addition, Cisco offers software application updates for bug fixes and telephone technical support at no charge for the first 12 months following the date of purchase. To download software updates, go to:
Product warranty terms and other information applicable to Cisco products are available at
Cisco SMB SFE2010P-G5 48-port 10/100 Stackable Ethernet Switch with PoE

Haga Click para agrandar
Para obtener más información, visite la página del producto.
Este producto esta en nuestro catálogo desde lunes 17 agosto, 2009.
Cisco SMB
Página de Cisco SMB
Otros productos
Hazte distribuidor de CiudadWireless Confia tu proyecto con nosotros
Ofertas más
Plantronics 201827-02 C565 Auricular inalámbrico para teléfonos DECT/GAP

Plantronics 201827-02 C565 Auricular inalámbrico para teléfonos DECT/GAP
BELKIN F9K1015az Belkin Wi-Fi Range Extender

BELKIN F9K1015az Belkin Wi-Fi Range Extender
D-Link DCS-34-3 Bent Mount for DCS-6511- Height: 253 mm (9.96 inches)- Diameter: 150 mm (5.9 inches)- Weight: 770 g (1.7 lbs)

D-Link DCS-34-3 Bent Mount for DCS-6511- Height: 253 mm (9.96 inches)- Diameter: 150 mm (5.9 inches)- Weight: 770 g (1.7 lbs)
Topcom SKYR@CER PC CARD 4054G (11 G)

Topcom SKYR@CER PC CARD 4054G (11 G)
Cisco SMB SG110D-08HP-EU SG110D-08HP 8-Port Gigabit PoE (4 Ports) Desktop Switch

Cisco SMB SG110D-08HP-EU SG110D-08HP 8-Port Gigabit PoE (4 Ports) Desktop Switch

precios validos salvo error tipográfico, IVA NO INCLUIDO
Tlf: 910609721| Fax: 916932130

El horario de atención al público y recogida de pedidos es de Lunes a Viernes: de 09:00h. a 18:30h.
El horario de atención telefónica es de Lunes a Jueves: de 09:00h. a 14:00h. y de 15:30h a 18:20h., y los Viernes: de 8:00h. a 15:00h. y de 15:30h. a 18:20h.
Solo atenderemos en nuestras instalaciones a clientes con pedidos ya realizados, ya sea por teléfono o vía web, no haremos en persona ningun pedido nuevo

No aceptamos pagos con tarjeta en nuestras instalaciones

Gráficos de soluciones