WAP351-E-K9 - Cisco SMB WAP351-E-K9 Dual Radio 802.11n Access Point with 5
Port PoE Switch (EU)
Provides cost-effective 802.11n connectivity for 2.4-GHz and 5-GHz clients
5-Port Gigabit Ethernet Switch for connecting multiple devices with PD/PSE
PD port allows access point to be powered by backbone switch
Captive portal enables highly secure guest access with customized roles and
Single point setup requires no controller for easy, cost-effective deployment of
multiple access points
Works right out of the box with easy installation and simple web-based
configuration and wizard
As your employees become more mobile and collaborative, they need dependable,
business-class access to network applications throughout the office. Extend
secure, high-performance mobile networking to them and guests simply and cost-effectively
with the Cisco® WAP351 Wireless-N Dual Radio Access Point. This flexible
solution lets you connect dozens of employees, and can scale to accommodate
additional users and changing business needs.
The Cisco WAP351 Wireless-N Dual Radio Access Point uses concurrent dual-band
radios for improved coverage and user capacity. The 5-port Gigabit Ethernet
switch allows more devices to be connected to the access point (AP) and allows
the AP to be powered by the backbone switch, also helping reduce cabling and
wiring costs. Intelligent quality-of-service (QoS) features let you prioritize
bandwidth-sensitive traffic for voice-over-IP (VoIP) and video applications.
To provide secure guest access to visitors and other users, the Cisco WAP351
Wireless-N Dual Radio Access Point supports a captive portal with multiple
authentication options and the ability to configure rights, roles, and bandwidth.
A customized guest login page lets you present a welcome message and access
details, and reinforces your brand with company logos.
Cisco WAP351 Wireless-N Dual Radio Access Points are easy to set up and use,
with intuitive wizard-based configuration to get you up and running in minutes.
An attractive design with flexible mounting options enables the access points to
smoothly blend into any small business environment.
To enhance reliability and safeguard sensitive business information, the Cisco
WAP351 Wireless-N Dual Radio Access Point supports both Wi-Fi Protected Access (WPA)
Personal and Enterprise, encoding all your wireless transmissions with powerful
encryption. In addition, 802.1 X RADIUS authentications help keep unauthorized
Designed to scale smoothly as your organization grows, the access points feature
controllerless Single Point Setup that simplifies the deployment of multiple
access points without additional hardware. With the Cisco WAP351 Wireless-N Dual
Radio Access Point, you can extend business-class wireless networking to
employees and guests anywhere in the office, with the flexibility to meet new
business needs for years to come.
Concurrent dual-band radio supports up to 300 Mbps per radio to maximize
capacity and coverage.
Single Point Setup, a controllerless technology, simplifies the deployment and
management of multiple access points - without requiring additional hardware.
Robust security, including WPA2, 802.1X with RADIUS secure authentication, and
rogue-access-point detection, helps protect sensitive business information.
Captive portal enables highly secure, customized guest access with multiple
rights and roles.
Simple installation and intuitive web-based configuration and wizard enable fast,
simple deployment and setup in minutes.
5- Port Gigabit Ethernet LAN Switch supports both PD and PSE, allowing IP
devices and the AP to be powered by a backbone switch.
Sleek design with multiple internal antennas and versatile mounting kit enables
installation on a ceiling, wall, or desktop.
Intelligent QoS prioritizes network traffic to help keep critical network
applications running at top performance.
Power-saving sleep mode and port control features help maximize energy
Workgroup Bridge mode lets you expand your network by wirelessly connecting to a
second Ethernet network.
Support for IPv6 lets you deploy future networking applications and operating
systems without costly upgrades.
Limited lifetime hardware warranty provides peace of mind.
Standards -IEEE 802.11n, 802.11g, 802.11b, 802.3af, 802.3u, 802.1X (security
authentication), 802.1Q (VLAN), 802.1D (Spanning Tree), 802.11i (WPA2 security),
802.11e (wireless QoS), IPv4 (RFC 791), IPv6 (RFC 2460)
Cabling type - Category 5e or better
Antennas Internal antennas optimized for installation on a wall or ceiling
LED indicators - Power, WLAN, LAN
Operating system - Linux
Ports - 5 10/100/1000 Ethernet, with support for 802.3af /at PoE, Power Port for
AC adapter (not included)
Power Supply - 802.3af/at PoE and External 48V/1.25A DC power adapter (not
Buttons - Reset button, Power On/Off
Slot for Kensington lock
Physical dimensions (W x D x H) - 9.055 x 9.055 x 1.575 in. (230 x 230 x 40 mm)
Weight - 1.34 lb or 0.607 kg
VLAN support - Yes
Number of VLANs - 1 management VLAN plus 16 VLANs for SSIDs
802.1X supplicant - Yes
SSID-to-VLAN mapping - Yes
Auto channel selection -Yes
Spanning Tree - Yes
Load balancing - Yes
IPv6 - Yes
● IPv6 host support
● IPv6 RADIUS, syslog, Network Time Protocol (NTP), etc.
Layer 2 - 802.1Q-based VLANS, 16 active VLANS plus 1 management VLAN
WPA/WPA2 - Yes, including Enterprise authentication
Access control - Yes, management access control list (ACL) plus MAC ACL
Secure management - HTTPS
SSID broadcast - Yes
Rogue-access-point detection - Yes
Mounting and Physical Security
Multiple mounting options - Mounting bracket included for easy ceiling or
Physical security lock - Kensington lock slot
Quality of service (QoS) - Wi-Fi Multimedia and Traffic Specification (WMM
TSPEC), Client QoS
Wireless throughput - Up to 300-Mbps data rate (real-world throughput will vary)
Recommended user support 32 active clients/users per radio
Multiple-Access Point Management
Single Point Setup - Yes
Number of access points per cluster - 8
Active clients per cluster - 240
Web user interface Built-in web user interface for easy browser-based
Management protocols - Web browser, Simple Network Management Protocol (SNMP)
Remote management - Yes
Event logging - Local, remote syslog, email alerts
Network diagnostics - Logging and packet capture
Web firmware upgrade - Firmware upgradable through web browser, imported/exported
Dynamic Host Configuration Protocol (DHCP) - DHCP client
IPv6 host - Yes
HTTP redirect - Yes
Frequency - Dual concurrent radios (2.4 and 5 GHz)
Radio and modulation type - Dual radio, orthogonal frequency division
2x3 multiple-input multiple-output (MIMO) with 2 spatial streams on 2.4 GHz
2x2 multiple-input multiple-output (MIMO) with 2 spatial streams on 5 GHz
20, and 40 MHz for 802.11n
PHY data rate up to 600 Mbps
Data rates supported:
● 54, 48, 36, 24, 18, 12, 9, 6, 11, 5.5, 2, and 1 Mbps
● 802.11n: 6.5 to 300 Mbps
◦ 20-MHz bandwidth: MCS 0-15 for supported data rates
◦ 40-MHz bandwidth: MCS 0-15 for supported data rates
Wireless isolation - Wireless isolation between clients
External antennas - None
Internal antennas - Internal Fixed PiFA Antenna
Antenna gain in dBi Maximum antenna gain of 5.3 dBi on 2.4 GHz
Maximum antenna gain of 5.1 dBi on 5 GHz
Wireless distribution system (WDS) - Yes
Roaming 802.11i only
Multiple SSIDs - 16
Wireless VLAN map - Yes
WLAN security - Yes
Wi-Fi Multimedia (WMM) - Yes, with unscheduled automatic power save
Operating Modes Access point -
Access Point mode, WDS Bridging, Workgroup Bridge mode
Power options - IEEE 802.3af/af Ethernet switch
Cisco Power Injector - SB-PWR-INJ2-xx
AC Adapter - SB-PWR-48V-xx (not included)
PoE power - Peak PoE power: 18W
Operating temperature - 0° to 40°C (32° to 104°F)
Storage temperature -20° to 70°C (-4° to 158°F)
Operating humidity - 10% to 85% noncondensing
Storage humidity - 5% to 90% noncondensing
- 128-MB RAM
- 128-MB Flash
● Cisco WAP351 Wireless-N Dual Radio Access Point
● Ceiling-/wall-mounting kit
● User guide on CD-ROM
● Quick-start guide
● Ethernet network cable
● Switch or router with PoE support, PoE injector, or AC Power Adapter
● Web-based configuration: Java-enabled web browser