Precio: 159.46EUR 107.02EURIVA:22.47Precio total: 129.50
802.11ac 2x2 Wave 2 Access Point Wall Plate
Offers a compact, wall plate–mountable form factor, ideal for in-room or office deployments requiring connectivity for both wired and wireless devices.
Supports simultaneous dual radios and dual bands with 802.11ac Wave 2 MU-MIMO functionality, delivering a better user experience and more predictable performance.
Three Gigabit Ethernet ports support a variety of connections with wired connectivity, Power over Ethernet (PoE), and passive pass-through.
Multi-User (MU) Multiple-Input Multiple-Output (MU-MIMO) technology allows transmission of data to multiple 802.11ac Wave 2–capable clients simultaneously to improve the client experience. Prior to MU-MIMO, 802.11n and 802.11ac Wave 1 access points could transmit data to only one client at a time. This was typically referred to as Single-User MIMO (SU-MIMO).
Gigabit Ethernet ports
Three local Gigabit Ethernet ports are available to securely connect wired devices to the network. Traffic from wired devices can be tunneled back to Master AP or be locally switched by the access point. One of these Ethernet ports can also provide Power over Ethernet (PoE) out to power a device such as an IP phone or a security camera.
Deploy and configure multiple Cisco Business access points and mesh extenders easily without a physical controller, using Cisco Business Mobile app. Optional multisite remote management is available through the Cisco FindIT Network Management.
Mesh technology support
Mix and match Cisco Business mesh extenders or access points to increase WiFi coverage throughout your business.
Flexible deployment models supporting multiple concurrent use cases required by small businesses, including point of sale systems, surveillance cameras, guest access, and more.
Authentication and security
Max # of Mesh Extenders
Data rates supported
802.11a: 6, 9, 12, 18, 24, 36, 48, and 54 Mbps
802.11b/g: 1, 2, 5.5, 6, 9, 11, 12, 18, 24, 36, 48, and 54 Mbps
802.11n data rates on 2.4 GHz: 6.5 to 300 Mbps (MCS0-MCS15, HT 20/40)
802.11ac data rates on 5 GHz: 6.5 to 867 Mbps (MCS0-MCS9)
Note: This varies by regulatory domain. Refer to the product documentation for specific details for each regulatory domain.
Note: The maximum power setting will vary by channel and according to individual country regulations. Refer to the product documentation for specific details.
? PoE out provides 802.3af (Class 0) when access point is powered by 802.3at, or no output when powered by 802.3af
Dimensions (W x L x H)
? Temperature: 32° to 104°F (0° to 50°C)
? Humidity: 10% to 90% (noncondensing)
? Maximum altitude: 9843 ft (3000 m) at 40°C
? Temperature: -22° to 158°F (-30° to 70°C)
? Maximum altitude: 15,000 ft (4500 m) at 25°C
Cisco Business limited lifetime hardware warranty
Free software updates, no service contract required
? UL 60950-1
? CAN/CSA-C22.2 No. 60950-1
? UL 2043
? IEC 60950-1
? EN 60950-1
? FCC Part 15.247, 15.407
? RSS-247 (Canada)
? EN 300.328, EN 301.893 (Europe)
? ARIB-STD 66 (Japan)
? ARIB-STD T71 (Japan)
? EMI and susceptibility (Class B)
? FCC Part 15.107 and 15.109
? ICES-003 (Canada)
? VCCI (Japan)
? EN 301.489-1 and -17 (Europe)
? EN 50385
? IEEE 802.11a/b/g, 802.11n, 802.11h, 802.11d
? IEEE 802.11ac
? 802.11i, WPA2, WAP3, WPA
? EAP-Transport Layer Security (TLS)
? EAP-Tunneled TLS (TTLS) or Microsoft Challenge Handshake Authentication Protocol Version 2 (MSCHAPv2)
? Protected EAP (PEAP) v0 or EAP-MSCHAPv2
? EAP-Flexible Authentication via Secure Tunneling (FAST)
? PEAP v1 or EAP-Generic Token Card (GTC)
? EAP-Subscriber Identity Module (SIM)
? Wi-Fi Multimedia (WMM)
? FCC Bulletin OET-65C